Ormco Enlight Light Cure Adhesive 1 Syringe 4 Gms + Bond 5ml (Kit) Combo

Ormco Enlight Light Cure Adhesive 1 Syringe 4 Gms + Bond 5ml (Kit) Combo

Features:
Enlight Light Cure Adhesive :

Highly filled light-cure adhesive
Superb handling characteristics
Highly active initiator system
Ortho Solo :

Ortho Solo incorporates a bond-enhancing property that improves adhesion to the tooth
at the adhesive interface
The glass filler, unique to Ortho Solo, is designed to act as a stress and shock absorber,
helping prevent cracks that can lead to bond failures
No air-dry or light-cure step is needed.
Includes a compound that displaces moisture, making the technique more forgiving when a dry field is inadvertently compromised.

In an effort to provide the orthodontist with the most advanced bonding products, Ormco has teamed up with its partner, Kerr, the leading innovator in dental adhesives. The combined efforts of the Kerr and Ormco scientists have resulted in technology which provides excellent bonding materials for reliability and efficiency.

Enlight Bonding Adhesive is a highly filled with light-cure adhesive. Bis-GMA resin for superb handling characteristics, easy cleaning.

Ortho Solo is a universal sealant and bonding primer for use with light cure and chemical cure
bonding systems. Ortho Solo’s hydrophilic property makes it moisture-tolerant for optimal and
reliable orthodontic bonding.

Shelf life and storage

Do not expose materials to intense light or elevated temperatures.
Enlight should be used at ambient temperature.

1 x Ormco Enlight Light Cure Adhesive 1 Syringe 4 gm
1 x Ormco Enlight Light Cure Ortho Solo Primer 5 ml

Tooth preparation
Place the lip/cheek retractor and saliva ejector in the mouth. prophy the teeth thoroughly with pumice and water. Rinse with water while using a high-speed evacuation system.
Dry the teeth with an air syringe.
Apply the etchant solution to the bonding surfaces with applicator sponges. Gently dab the etching solution: do not rub. A continuous dabbing of fresh solution for 30 seconds is most effective. Rinse thoroughly with a forceful air-water spray and suction using a high-speed evacuator. Maintain a dry field. Do not allow the patient to rinse or permit contact of the etched
enamel with saliva or mucosal tissue.
Dry the etched enamel with clean, dry air, The etched enamel must now have a uniform, dull frosty appearance.

Bonding Procedure
Dispense a small amount of sealant on the mixing pad. apply ortho solo sealant to teeth using the brushes provided. A thin, uniform coating should extend from the gingival crest and cover all of the etched enamel. Replace the cap immediately after dispensing sealant.
Extrude a small amount of enlight adhesive paste into the base of the bracket pad. After application, clean the tip and replace the cap.
Place the bracket onto the tooth surface immediately after applying adhesive.\
Adjust the bracket to its final position and press firmly.
Remove the excess adhesive from the periphery of the base of the brackets.
With Demetron’s optilux 501, Expose the adhesive for 10 seconds for metal brackets, and 5 seconds for ceramic brackets. shining the light directly through the bracket bonds ceramic brackets. Divide the curing time and shine the light on the mesial and distal edges of the brackets to bond metal brackets.
Active archwires may be placed immediately after curring the last bracket.